Home Page

Traditional Plywood Speedboat
   
The owner obtained her in the condition you see above. He contacted us to use our products based on articles written in Australian Amateur Boat Builder by others undertaking restorations using Bote-Cote Marine Epoxy System.

We provided James with product advise and the importance of stripping off all paint and sealing both the inside as well as the outside with Bote-Cote Marine Epoxy Resin using Non Yellowing Hardener. This ensued the timber was stabillised and would prevent problems with timber cracking and rot later on. The outside was finished with three (3) coats of BOTE-COTE and Clear AQUACOTE (Clear System) and The inside with was fished with Bule AQUACOTE.

A Top restoration, well done James.
  Print this page  
DRIVE Marine Services provides Good Quality products at a reasonable price
BIAMember BEVERLY HILLS NSW  2209
(02) 9533 5470 		Bote.Cote@optusnet.com.au
This site is © Drive Marine Services 2008, All Rights Reserved